Research Report
-
2017
-
2019
-
2020
-
2021
-
academic article
- 3D CaP porous scaffolds with grooved surface topography obtained by the sol-gel method
- Comment on "Parameter extraction of single-diode photovoltaic module using experimental current-voltage data"
- Customized depolarization spatial patterns with dynamic retardance functions
- Effects of the healing chambers in implant macrogeometry design in a low density bone using conventional and undersized drilling.
- Encoding complex amplitude information onto phase-only diffractive optical elements using binary phase Nyquist gratings
- Extraordinary spin to orbital angular momentum conversion on guided zone plates
- Intelligent Monitoring Platform to Evaluate the Overall State of People with Neurological Disorders
- Interleaved, switched inductor and high-gain wide bandgap based boost converter proposal
- LVDC SiC MOSFET Analog Electronic Fuse With Self-Adjusting Tripping Time Depending on Overcurrent Condition
- Micro-/Nano-Structure Ceramic scaffolds that mimic natural cancellous bone
- Multilayer Mg-pyrophosphate glass ceramic with discontinuous bioactivity. Physicochemical characterization
- Multiple-order correlations and convolutions using a spatial light modulator with extended phase range
- On the optimization of Spread Spectrum chirps into Arbitrary Position and Width Pulse signals. Application to ultrasonic sensors and systems
- Photovoltaic Evaporative Chimney I-V Measurement System
- Programmable supercontinuum laser spectrum generator based on a liquid-crystal on silicon spatial light modulator
- Sequential Switching Shunt Regulator Parallel Power Processing Control for High Capacitance Solar Arrays
- Simple method to evaluate the pixel crosstalk caused by fringing field effect in liquid-crystal spatial light modulators
- Study of Qu-Based Resonant Microwave Sensors and Design of 3-D-Printed Devices Dedicated to Glucose Monitorin
- Study of Qu-Based Resonant Microwave Sensors and Design of 3-D-Printed Devices Dedicated to Glucose Monitoring
- UWB-Printed Rectangular-Based Monopole Antenna for Biological Tissue Analysis
- Unraveling the physical information of depolarizers
-
chapter
- A new method for obtaining higher-orderoptical correlation / convolution using a spatial light modulator with extended phase modulation
- Capítulo12 - INTERNACIONALIZACIÓN VIRTUAL DE LA DOCENCIA EN EL ÁMBITO DE LA INGENIERÍA
- Generation and detection of vector beams with geometric phase components and spatial light modulators
- Indices of polarimetric purity: Application in biological tissues
- Laboratorio docente de impresión 3d para el diseño y la fabricación de circuitos de microondas en guía de onda
- Retrieving physical information from depolarizing systems
-
congress communication
- "Learning Mobility for Teachers"
- Beams with tailored spatially-varying degree of polarization
- CONVERTIDOR DE POTENCIA SPFF USADO PARA ALIMENTAR A UN ELECTROLIZADOR EN UN MINI SATÉLITE
- Diffractive optical elements implemented with liquid-crystal spatial light modulators with extended phase modulation
- Diseño e implementación de un regulador de paneles solares para un micro satélite
- Diseño práctico de un filtro paso-banda en guía de onda utilizando técnicas aditivas de impresión 3D y estructuras periódicas
- Diseño y análisis de un resonador híbrido para la caracterización de material biológico
- Diseño y fabricación de circuitos electrónicos de microondas mediante técnicas aditivas de impresión 3D
- Dispositivos modulares de protección y control de potencia para aplicaciones espaciales
- Dynamic liquid-crystal retardance functions for the spatial control of depolarization
- ESTUDIO Y ANÁLISIS DE UN SISTEMA DE ACONDICIONAMIENTO DE POTENCIA PARA APLICACIONES ESPACIALES
- Effects of the implant macrogeometries on the early osseointegration: An in vivo experimental study
- Estudio en el domino de la frecuencia y del tiempo de una antena monopolo impresa de banda ancha para aplicaciones de imagen médica
- Flexibilización de prácticas de laboratorio en asignaturas relacionadas con la electrónica
- Fuente láser de luz supercontinua espectralmente programable utilizando pantallas de cristal líquido
- Full characterization of the physical parameters of a twisted-nematic liquid-crystal modulator through Mueller matrix analysis
- Implementación, desarrollo y fabricación de un analizador de redes vectorial de bajo coste para laboratorios de microondas
- Laboratorio docente de impresión 3d para el diseño y la fabricación de circuitos de microondas en guía de onda
- Limitador de corriente con enclavamiento para aplicaciones espaciales utilizando un MOSFET-P y un JFET SiC normalmente encendido
- Mathematical modelling of photovoltaic panels
- Mueller matrix polarimeter for the characterization of liquid-crystal devices: application to a twisted nematic modulator
- Mueller polarimetric imaging analysis of vector-beam generating devices
- Photovoltaic evaporative chimney I-V measurement system
- Propuesta y diseño de un nanosatélite de comunicaciones para fines educativos
- Prácticas reales de medida de los parámetros s de circuitos electrónicos para la mejora docente de asignaturas de microondas
- Sistema de imagen médica no invasivo basado en microondas. Aplicación en brain-shift y tumores en cáncer de mama
- Síntesis y caracterización de estructuras cerámicas porosas 3D multicapa obtenidas mediante el proceso sol-gel para aplicación en ingeniería de tejido óseo
- Transmisión de pulsos en el dominio del tiempo en antenas de banda ancha para aplicaciones de imagen médica
- VIRTUAL INTERNATIONALIZATION IN ENGINEERING
- Virtual teaching laboratory for the measurement of radio frequency electronic circuits in times of pandemic
-
event
-
external project
-
hiring
-
person (active)
- ACEBAL GONZALEZ, PABLO
- AGANZO LISON, FRANCISCO JOSE
- ALAVES MAÑOGIL, HIGINIO
- ARIAS RODRIGUEZ, JULIA
- AVILA NAVARRO, ERNESTO
- BLANES MARTINEZ, JOSE MANUEL
- BLAYA ESCARRE, SALVADOR
- CARRASCO HERNANDEZ, JOSE ANTONIO
- CARRETERO LOPEZ, LUIS
- DE AZA MOYA, PIEDAD NIEVES
- DE LA CASA LILLO, MIGUEL ANGEL
- FIMIA GIL, ANTONIO
- GARCIA CABRERA, JUAN
- GARCIA DE QUIROS NIETO, FRANCISCO JAVIER
- GARCIA MARTINEZ, HECTOR
- GARRIGOS SIRVENT, AUSIAS
- LOPEZ MORELL, PABLO
- MADRIGAL MADRIGAL, ROQUE FERNANDO
- MARROQUI SEMPERE, DAVID
- MAZON CANALES, PATRICIA
- MORENO SORIANO, IGNACIO
- MURCIANO CASES, ANGEL
- NAVALON BERNABEU, MOISES
- ORTS TORRES, CARLOS
- PALAZON SELVA, JOSE ANTONIO
- PARICIO CAÑO, JAVIER
- RUBIATO BROTONS, JAVIER
- TORRES VERGARA, CRISTIAN
- VELASQUEZ CASTILLO, PABLO ANDRES
-
proceedings
-
research project
- 2004/00010/005
- 2021/PSG/00006
- 4000133775/21/NL/CBi
- 601137-EPP-1-2018-1-RO-EPPKA2-KA
- AICO/2020/218
- AICO/2021/058
- APE/2020/017
- COMPACIENCIA21/04
- EQC2019-006428-P
- IDIFEDER/2020/018
- IJ1003IP
- INNVAL GLUCOSA
- PID2019-111023RB-C32
- PIEU/2020/30
- PIEU/2020/39
- PRODICUMH2021_33
- PROMETEO/2017/154
- PROMETEO/2019/119
- PV0010IP
- RTI2018-098969-B-I00
- RTI2018-099009-B-C21
- VIDIF21/22
- VIDIF21/30
- VIDIF21/52
-
technological support
-
thesis
- CIRCUITOS DE MICROONDAS MEDIANTE TÉCNICAS DE FABRICACIÓN ADITIVA
- DESIGN AND CHARACTERIZATION OF SPATIAL LIGHT MODULATOR OPTICAL SYSTEMS AND GEOMETRICAL PHASE ELEMENTS FOR THE GENERATION OF STRUCTURED LIGHT
- MATRICES 3D DE FOSFATO TRICÁLCICO-SILICOCARNOTITA CON MICRO-/NANO-ESTRUCTURA EUTECTOIDE Y FORMACIÓN IN SITU DE APATITO
- NUEVOS DISPOSITIVOS ELECTRÓICOS Y ALGORITMOS PARA LA MONITORIZACIÓN AMBULATORIA DE PERSONAS CON TRASTORNO DEL ESPECTRO DE AUTISMO
- RETARDADORES ÓPTICOS EN UN RANGO ESPECTRAL EXTENDIDO: CARACTERIZACIÓN Y FILTROS BIRREFRINGENTES
-
thrid party project