Anualidad
Research Activity Report
Micro-platform power system for scientific deep space exploration
the phase equililbrium diagrams: a key tool for ceramic material science
Hybrid vector beams generated by cascaded q-plates
Eutectoid scaffold as potential tissue engineer guide
Eutectoid scaffolds that mimic porous human bone tissue
Simultaneous aberration and aperture control using a single spatial light modulator
Study of Two Bovine Bone Blocks (Sintered and Non-Sintered) Used for Bone Grafts: Physico-Chemical Characterization and In Vitro Bioactivity and Cellular Analysis
New Titanium Implant Surface: An in vitro and in vivo evaluation
In vitro behaviour of a diopside - wollastonite eutectic ceramic
Caracterización eléctrica DC y circuito de acondicionamiento para un sensor de corriente magnetorresistivo TMR comercial
5TH INTERNATIONAL CONFERENCE AND EXPO ON CERAMICS AND COMPOSITE MATERIALS (Congress Organization)
Vectorial analysis of Airy-Airy bullets generated by high aperture binary micro zonal plate
JORNADA CIENTIFICA-LUZ ESTRUCTURADA, POLARIMETRIA E IMAGEN (Congress Organization)
Intraosteal behavior of porous scaffolds: The mCT raw-data analysis as a tool for its better understanding.
Micro-retardadores ópticos: óptica reprogramable y óptica difractiva de nueva generación
Analytical optimization of a solar-driven cooling system enhanced with a photovoltaic evaporative chimney
Implementación de circuitos planares de microondas mediante técnicas aditivas
Monitorización del estrés en personas de edad avanzada utilizando la señal de GSR
Glucose Concentration Measurement in Human Blood Plasma Solutions with Microwave Sensors
Caracterización de retardadores ópticos estructurados mediante su color de birrefringencia
Ciencia de Materiales, Óptica y Tecnología Electrónica
Holographic projection with a high-resolution liquid-crystal spatial light modulator
Portable Device Based on Microwave Resonator for Noninvasive Blood Glucose Monitoring
Synthesis and in vitro bioactivity characterization of porous scaffolds from biphasic ceramic in the system Ca3(PO4)2-Ca2SiO4
Eutectoids: a new bioceramic materials for bone tissue engineering
Concentration Measurement of Microliter-Volume Water¿Glucose Solutions Using Q Factor of Microwave Sensors
Optimal triplicator design applied to a geometric phase vortex grating
Control dinámico de haces láser mediante moduladores espaciales de luz
Particulate Extracted Human Teeth Characterization by SEM-EDX Evaluation as a Biomaterial for Socket Preservatio: An in Vitro Study.
Complex Structures in Microwave Circuits by Using Additive Manufacturing Techniques
Sistema de imagen médica no invasiva basado en microondas para detección de brain-shift
Spatially variant retarders used as geometric phase diffractive elements
Highly-Sensitive Glucose Concentration Sensor Exploiting Inter-resonators Couplings
XVI ECERS INTERNATIONAL CONFERENCE EUROPEAN CERAMIC SOCIETY ECERS2019 (Congress Organization)
Evaluation of an Environmental Autism Spectrum Disorder Monitoring Device
Existence of periodic solutions for a scalar differential equation modelling optical conveyor belts
Microgrooves and Microrugosities in Titanium Implant Surface: An in vitro and in vivo evaluation
Ciencia de Materiales, Óptica y Tecnología Electrónica 2019
Nurse¿s A-Phase¿Silicocarnotite Ceramic¿Bone Tissue Interaction in a Rabbit Tibia Defect Model
Evaluation of four different titanium surface treatment on the bone healing in defects filled only with blood clot: a experimental animal study.
Control digital de haces vectoriales mediante moduladores espaciales de luz
Analysis of Microwave Passive Circuits Designed Using 3D Printing Techniques
Non-Invasive Device for Blood Pressure Wave Acquisition by Means of Mechanical Transducer
Photovoltaic-Driven SiC MOSFET Circuit Breaker with Latching and Current Limiting Capability
Holographic projection system with programmable control of state of polarization, focus plane, and size of the reconstruction,
Easy manufacture of 3D ceramic scaffolds by the foam replica technique combined with sol-gel or ceramic slurry
SLM based holographic projection system without moving elements
Synthesis and characterization of new 3D Fe-doped bioceramic scaffold obtained via Sol-Gel method
Structural changes during in-vitro crystallization of apatite on 3D-Si-Ca-P ceramic scaffolds.
Digital holographic microscopy for the study of light-cell interaction in real time
New implant macrogeometry to improve and accelerate the osseointegration: An in vivo experimental study
Electric Power Module for Bare Electrodynamic Tether
An Analog Maximum Power Point Tracker With Pulsewidth Modulator Multiplication for a Solar Array Regulator
Encoding lenses with focal lengths lower than the Nyquist limit using high phase-modulation displays
Microstructure and biocompatibility of an eutectoid 3D-Si-Ca-P porous ceramic
Eutectoid dicalcium silicate-Nurse¿s A ceramic scaffold: processing and in vitro bioactivity
Study of Two Bovine Bone Blocks (Sintered and Not-Sintered) Used for Bone Grafts: Physico-Chemical Characterization and In Vitro bioactivity and Cellular Analysis
Impact of different titanium implant thread designs on bone healing: a biomechanical and histometric study in animal model
Sistema no invasivo basado en microondas para detección de tumores mamarios
SiC MOSFET vs SiC/Si Cascode short circuit robustness benchmark
Multilayer materials: a method to link bioactivity and durability
A Space Power System for Energy Harvesting from an Electrodynamic Tether
Optical Conveyor Belts for Chiral Discrimination: Influence of De-Phasing Parameter
Additive Manufacturing Techniques Applied to the Design of Radio Frequency Planar Circuits
Histological and histomorphometric analysis of two bovine bone blocks implanted in rabbits calvaria
Circuit proposals for high-voltage latching current limiters
Highly-efficient generation of arbitrary vector beams
Effect of platform switching size and vertical implant depth on crestal bone remodeling: an histological animal study
Synthesis and in vitro characterization of 3D multilayer porous scaffolds
Biomechanical effects of a new macrogeometry design of dental implants: an in vitro experimental analysis
GARCIA DE QUIROS NIETO, FRANCISCO JAVIER
Feasibility study of portable microwave microstrip open-loop resonator for non-invasive blood glucose level sensing: proof of concept
Diseño e implementación de controladores de potencia de estado sólido SiC para aplicaciones DC
Gouy phase effects on propagation of pure and hybrid vector beams,
Parallel generation of vortex beams with a two-dimensional optimal triplicator geometric phase design
Concept of a system for real-time measurement and visualization of brain-shift
Electric power module for a bare electrodynamic tether
The effect on bone stress in oral prosthetic rehabilitation supported by different number of dental implants: a numerical analysis
Comparison of six titanium surfaces differentially treated and analysis of the ability of fibroblasts to grow and adhere to these different surfaces
In vitro bioactivity and cell biocompatibility of a hypereutectic bioceramic
Robot Seguidor de Líneas Para Prácticas Docentes Basado en PSoC 4
Hybrid and Intelligent - Solid State Power Controller ¿ HI-SSPC ¿
Visualización 3D de las deformaciones geométricas del cerebro en tiempo real utilizando realidad aumentada¿
Two-dimensional geometric-phase vortex grating based on the optimal triplicator design
Self-Powered 380 V DC SiC Solid-State Circuit Breaker and Fault Current Limiter
Innovative Education Networking for Optics and Photonics Active Learning
Eutectoids: a new bioceramic materials for bone tissue engineering.
Biomechanical and histological analysis of titanium (machined and treated surface) versus zirconia implant materials: An in vivo animal study
Electrodynamic Tether Energy Harvesting Electrical Power System for a Low Earth Orbit Satellite
DISEÑO Y FABRICACIÓN DE UN ANALIZADOR DE REDES VECTORIAL DE BAJO COSTE PARA LAS PRÁCTICAS DE ELECTRÓNICA DE COMUNICACIONES
Using birefringence colors to evaluate a tunable liquid-crystal q-plate,
Diseño de filtros multicapa mediante técnicas de fabricación aditiva.
Sistema no invasivo para la medida y visualización de desplazamientos de tejidos en neurocirugía
RDF description of Ciencia de Materiales, Óptica y Tecnología Electrónica 2019 - http://research.umh.es/vivo/pub/memoria/2019/org_30